APPSC departmental tests books available shops in AP & Hyderabad

Books Available Place -- Book Shop Names

〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰

◘ Hyderabad -- Law Publico Ph:24616469

◘ Ananthapur -- Vasavi Book Stall Ph:9849898487, Jyothi Book Stall Ph:08554221598 & SIV Book Stall Ph:9848080123

◘ Chittoor -- Pragathi Book Centre Ph:08572226326

◘ Cuddapa -- Vijaya Lakshmi Enterprises Ph:08562243227 & SRS Agencies Ph08562243667

◘ Eluru -- Vijaya & Co Ph:9395511155

◘ Guntur -- Sri Venkateswara Book Depot Ph:08636642924

◘ Kakinada -- Sudhita Book Centre Ph:08842368677

◘ Kurnool -- Krishna Book Depot Ph:08518245578

◘ Machilipatnam -- New Minerva Book Depot Ph:08672222679

◘ Nellore -- Sri Ramakrishna Book Depot Ph:08612327391

◘ Ongole -- Sri Venkateswara Book Depot Ph:08592232176

 ◘ Srikakulam -- Jyothi Book Depot Ph:08942229515 & Prakash Babu Book Stall Ph:08942226450

◘ Tirupathi -- Lakshminarayana Publications Ph:9000598974 & Yogaprabha Book Links Ph:08772250672

  

DEPARTMENTAL TESTS - 2020 BOOKS FOR PAPER CODES 8 AND 10

PAPER CODE -- 8 (PART I)

1. The Andhra Pradesh financial code, volume i

2. The Andhra Pradesh financial code, volume ii

3. The Andhra Pradesh treasuary code, volume i, part i, part ii (chapters ii, v and vii) and part iii (chapter iv).

4. The Andhra Pradesh treasuary code, volume ii, (omitting appendices 1 to 7, 10, 11, 14, 15 and 18-25).

5. The Andhra Pradesh account code, volume i (chapters 3 to 6 and appendix 3).

6. The Andhra Pradesh budget manual-chapter i, v, vii and viii.

7. The fundamental rights and the subsidary rules framed thereunder by the Andhra Pradesh government including the Andhra Pradesh leave rules 1933.

8. The Andhra Pradesh manual of special pay and allowances, part i (omitting appendix) and part ii.

9. The Andhra Pradesh pension code.

PAPER CODE -10 (PART II)

1. The Andhra Pradesh treasuary code, volume i, part ii (chapters i, ii, iv, viii, ix and xi and part iii (chapter i-iii).

2. The Andhra Pradesh treasuary code, volume ii (omitting appendices 1-9, 12, 13, 16, 17).

3. The Andhra Pradesh account code, volume ii.

4. The government securities manual, third edition. chapter i (omitting paragraphs 10 and 11), chapter ii (omitting paragraphs 13 and 23), chapters iv, v, vi, ix, x (omitting paragraphs 123 and appendix ii) and the Andhra Pradesh government securities rules,1937.

5. The constitution of India 1950, articles 148 to 151, 202 to 207,264 to 293 and 308 to 314.

6. An introduction to the Indian government accounts and audit.

NOTE:- Applications are invited Online for the Departmental Tests May 2020 Session (Notification No: 03/2020) from 08/07/2020 to 27/07/2020. The last date for payment of fee is 26/07/2020 (11:59PM). The Departmental Tests are scheduled from 25/08/2020 to 01/09/2020. The detailed Notification is available on the Commission’s website https://psc.ap.gov.in from 01/07/2020 onwards.

WHAT IS A PLINTH BEAM? ITS USE IN BUILDINGS?

CONVERSION TABLE -- 1

1 Inch	2.54 Cm
1 Feet	12 Inches
1 Feet	30.48 Cm
1 Sqft	0.0929 sqmtr
1 meter	100 Cm
1 meter	39.37 Inch
1 meter	3.28 Feet
1 Sqmtr	10.76 Sqft
1 Finger	3 Cm
1 kol (malayalam)	72 Cm
1 Cent	435.60 Sqft
1 Cent	40.47 Sqmtr
1 Acre	100 Cent
1 unit	100 Cubic Feet

High consistancy (Hc) cleaners | | working principle of high consistency cleaner

High consistancy (Hc) cleaner is made ready according to foreign products and relevant technical information. It is used for removing high density particles like sand, metallic pieces (staples, paper clips) etc., from pulp in pulping and paper industry. These particles may cause wear or damage to subsequent machinery and therefore they must be removed from pulp. It is one of the main equipment in wastepaper recycling and pulping industry.

It is placed vertically, it can takes up less area. The cleaner can be directly mounted on floor and fixed on rigid support as well. It is very easy to operate and maintain the cleaner.

Basic Parts:

The cleaner mainly consists of; inflow pulp chamber, cone, support, dregs tank.

The pulp inlet line is present at the top of the cleaner in tangential direction, accepted pulp outlet line is present at the centre of the top of the inflow pulp chamber with an inserted wear resisting sleeve. The cone is divided into two parts as upper section and lower section. Upper part is pulp section and lower part is dregs section. The balancing water inlet line is present at the top of dregs section and washing water inlet line is present in dregs section. Sight glass is also present in the dregs tank for observation.

Working Mechanism:

Pulp goes into the cleaner along a tangent line at a pressure 0.2 to 0.6 MPa. When the pulp moves in spirals along the internal walls, accelerative centrifugalisation occurs. Because of this centrifugalisation, heavy particles present in the pulp are thrown towards the internal walls and move downwards in spirals. At the center of the area near the smaller diameter end of the top cone, the accepted pulp in spiral motion forms eddy under the interaction of speed and the motion area. Simultaneously the accepted pulp forms an up screw-column motion and flow outwards through the outlet present at the top of the cleaner. Heavy particles go downwards to  the bottom of the cone and settle in the dregs tank. This is connected to a high pressure water line, for washing the heavy particles and recovering the fibre. Under low consistency and high-pressure difference, efficiency of cleaner to remove heavy particles is high.

Main specifications and technical parameters:

We are giving what are the specifications and technical parameters we have to consider before implementing the cleaner.

Model
Flow rate : L/min
Consistency % of inflow pulp
Pulp inflow pressure: MPa
Difference of inflow and outflow pulp pressure: MPa
Pressure of equilibrating water: MPa
Flow of equilibrating water : L/Min
Pressure of compressed air: Mpa
Rejects discharge method	Automatically/Manually
Weight of equipment

Operation:

1. Open the valve of the accepted pulp outlet, close the upper and under gate valves of the dregs chamber.

2. Open the balancing and washing water valves and fill water into the dregs tank.

3. Open the upper valve of dregs tank, then the washing water raises continuously.

4. Start to supply pulp, and ensure the pressure difference between the inlet and outlet flow pulp.

5. Balancing water pressure must be above the inlet pulp flow pressure, if the pressure is low adjustment should be done.

6. After settle-down of dregs in dregs chamber we have to discharge them periodically. To do this we have to close the washing water valve and upper valve of dregs tank, and then open the the lower valve of dregs tank to discharge the dregs.